Description

Features:
1. Connect the motor, the motor wire can be positive or negative.
2. Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor stops.
3. Potentiometer knob. Adjusting the potentiometer knob can change the output duty ratio of the governor and the motor speed.

Specifications:
1. Input voltage requirement: 10V-36VDC (wide range)
2. Output power: 150W
3. Continuous current: 5A, overload short circuit protection current 8A, short circuit time no more than 30 seconds
4. PWM pulse width modulation range: 0%-100%
5. Size: length 74mm*width 46mm height about 27mm 
according to the center distance of the mounting hole 63.5mm*36.5mm 
positioning hole diameter 3.5mm
6. Weight: 60 grams.
                          
Wiring:
1. Connect the power cord, ensure that the positive and negative switches are in the middle zero position, connect the DC power supply, ensure that the DC power supply voltage range is greater than 10V and less than 36V, and ensure that the output power of the power supply meets the needs of the motor. Do not connect the positive and negative terminals of the DC power supply in reverse, otherwise The governor may be damaged.

For more info

Call: 7543355
Viber : 7543355
Website : https://gadgets.mv